DJ Mag
Creating vocal pads from chopped harmonies
Jordan Rakei demonstrates how to transform chopped vocal harmonies into lush vocal pads using a combination of sound design and signal processing techniques. He begins by singing and chopping different harmonies, then layers and loops them to create a textured pad. To enhance the pad's texture, Rakei applies delay and reverb, rolling off the low frequencies to prevent muddiness and ensure clarity alongside the main instruments like the Rhodes. He uses a digital delay for an old-school vibe and adds reverb to create a lush, expansive sound. Finally, Rakei employs sidechain compression, subtly ducking the pad with the kick drum to carve out space in the mix. This technique ensures the vocal pad integrates smoothly, adding depth and texture without overwhelming the track.
SonicScoop
Crafting psychedelic vocals with layered effects
Stuart White delves into crafting psychedelic vocals by layering and interweaving multiple effects. He combines a short delay for texture, a stereo flanger for width, and a long, psychedelic delay to create a rich, ethereal sound. By routing the long delay into a spring reverb and the widener, Stuart enhances the psychedelic atmosphere and expands the soundstage. To maintain clarity and prevent the effects from overwhelming the dry vocal, Stuart heavily compresses the effects returns, ensuring they remain controlled within the mix. This approach allows the effects to be prominent without overshadowing the vocal's presence. Additionally, he employs sidechain compression on the long delay, ducking it with the dry vocal to preserve intelligibility and keep the vocal at the forefront.
Sound On Sound
Spice up drums recordings with parallel processing
Vance Powell demonstrates how to enhance drum recordings using parallel tracks with analog effects, creating a deeper and more characterful sound. He employs an old Ampex mic under the snare, routed through effects pedals for distortion and analog delay, achieving a triplet echo reminiscent of "When the Levee Breaks." This track, dubbed "Sprinkle to Taste," adds a unique texture to the drum mix. Additionally, Powell uses a "distorted kit" track, blending the entire drum kit through a distortion box, and a "mono kit" track, which compresses the kick, snare, and toms via an 1176 compressor, excluding cymbals. These elements are recorded directly into Pro Tools, avoiding excessive plugin use, and are layered with the original drum tracks to create a rich, dynamic sound.
Reverb.com
Breathing life into MIDI drums with pedal effects
St. Vincent breathes life and vibe into MIDI drum patterns by using a creative chain of effects pedals. The Chase Bliss Habit and Hologram Microcosm, which function as both delays and phrase loopers, introduce randomness and chaos, transforming otherwise lifeless drum sounds into vibrant, manipulated, and interesting textures. To enhance the character and aggression of the drums, St. Vincent employs the Walrus Audio Janus for distortion, adding a gritty edge that makes the drums stand out with more personality and intensity.
Puremix
Record snare with distorted delay for character and depth
Vance Powell employs a unique technique to add character and depth to the snare by using a dedicated mic, which he calls the "Sprinkle to taste" mic, placed under the snare as an effects mic. This mic is routed through a chain of guitar pedals, including the Pigtronix Polysaturator for distortion and a custom analog delay pedal, which together create a reverb-like sustain. The delay and distortion enhance the snare's sustain, giving it a deeper, more textured sound. Powell uses a gate on his console to eliminate noise when the snare isn't being played, ensuring a clean and focused effect. By experimenting with phase alignment, Powell further refines the snare's sound, ultimately deciding that the out-of-phase setting provides a more desirable tonal quality. This creative approach results in a snare sound that stands out with added character and depth.
SonicScoop
Using the vocal mic as a drum room
Catherine Marks creatively repurposes the vocal mic to capture drum room ambience. By leaving the vocal mic open during drum recording sessions, she harnesses its characteristics to add depth and character to the drum sound. The vocal mic's signal is processed with the same reverb and delay effects intended for vocals, using an Echosex delay pedal and a Holy Grail reverb pedal. This approach creates a spacious quality that she blends with the rest of the drum mix for added dimension. Additionally, Marks employs gating to tighten the sound, allowing for a controlled yet expansive drum ambience.
Mix with the Masters
Blending drum mics with parallel processing for character
Tchad Blake explores the creative potential of blending traditional drum mics with heavily processed signals using techniques like delay, compression, and distortion. By experimenting with different mic combinations and processing, Blake demonstrates how to quickly achieve a versatile palette of drum sounds that can adapt to various musical contexts. This approach allows for exciting and dynamic drum recordings, ready to fit seamlessly into a mix without extensive setup time. Blake emphasizes the importance of being prepared to record at a moment's notice, even without full knowledge of the session's specifics. He highlights the flexibility of using different equipment with strong sonic character, such as the SansAmp distortion pedal or the Spectra C610 compressor, to achieve unique textures and tones, ensuring that the drum sound can be tailored to the needs of any project.
Mix with the Masters
Add depth and lift the chorus with ping pong delay
Scheps employs a ping-pong delay technique to impart depth and size, which helps elevate the chorus above the verse.
Mix with the Masters
Building intensity: From dry to slap delay vocals
Ben Baptie uses effects automation to build intensity in a vocal track by transitioning from a completely dry sound to incorporating a slap delay. Starting with no reverb or effects, the dry vocal allows the song to begin with a raw, intimate feel. As the song progresses, Baptie introduces slap delay to create a secondary rhythm, enhancing the vocal's interaction with tightly picked guitar parts. This technique not only adds depth but also creates syncopation between the vocals and instruments, enhancing the song's rhythmic cohesion and dynamic feel. By carefully timing the introduction of effects, Baptie ensures that each verse feels more intense and engaging, even if the musical elements remain similar.
Mix with the Masters
Add width and size with short delay and chorus
Tom Elmhirst enhances the width and size of jazz and pop vocals using a combination of short delay and chorus effects. He employs the UAD Brigade Chorus to add warmth and width, creating a "cotton wall" feeling around the vocal without overwhelming it. Additionally, Elmhirst uses the Valhalla DSP Delay set to a slap delay with no feedback, providing depth and a sense of space while maintaining clarity and intimacy in the vocal performance. This approach ensures the vocals sound bigger and more engaging, fitting seamlessly into the mix.
Sam Evian
Combine analog delay and chorus to add depth and character
Owens combines multiple effects to get a more interesting, complex and spacious vocal effect. On one hand, there is a mono slap delay that is fed through a stereo chorus. The delay-chorus combination produces a short and interesting ambience. Both the slap and the chorus are analog guitar pedals, printed back into the session. Their limited frequency response and harmonic distortion gives the effect a distinctive character.
Tape Notes Podcast
Building tension with effects automation on the mix bus
Jack Antonoff demonstrates how to create excitement and build tension using delay and modulation effects automation directly on the mix bus. He employs Soundtoys EchoBoy for delay and Soundtoys Tremolator for tremolo, showcasing how these effects can transform a section to feel entirely different. By applying these effects to the master, Antonoff can quickly shift the sonic landscape without getting into the minutiae of individual tracks. This approach allows for dramatic changes, such as making a bridge feel distinct or adding a pulsing movement to a section, enhancing the overall dynamics and interest of the track.
DJ Mag
Double-tracking shakers with vari-speed
Jordan Rakei enhances his track's natural feel by adding double-tracked shakers using vari-speed recording. He records the second shaker at a faster tempo, creating a distinct texture and feel. By returning the recording to its original tempo, the vari-speed technique transforms the audio, resulting in a unique pitch and rhythm. This approach adds a more interesting and wider sound stage when the shakers are panned left and right. Rakei further refines the groove by using Logic's delay function to offset the shakers slightly behind the beat.
Sam Evian
Add movement and texture with modulated delay
For "Time to Melt," Sam Owens harnesses the modulation features of the Korg SDD-2000 to craft intriguing textures for both the drum machine and guitars. He processes the drum machine with the delay set to fully wet and significantly cranks up the modulation depth for a noticeable impact. This method requires the delay time to be kept short to prevent notable timing shifts in the drum tracks, or alternatively, any discrepancies in timing must be adjusted post-recording in the DAW. Beyond modulation, Owens enhances the guitars by utilizing the stereo outputs of the SDD-2000, creating a wide stereo image with one side phase-inverted compared to the other, further enriching the track's sonic landscape.
Puremix
Feed delay into reverb to create a spacious, ethereal vocal effect
To create a spacious, long, ethereal vocal effect, Darrell Thorp employs a technique he calls the "Delay Verb". It involves using a stereo aux return with both a delay and a reverb, fed by a single send. He favors the Massey TD5 delay for its authentic tape-like quality and the Avid D-Verb for its lo-fi character and spacious sound. The TD5 delay is set to about 40% wet, so it sends both the dry signal and the delayed signal into the D-Verb. The reverb is set to 100% wet. The delay's mix and feedback controls can be used to effectively adjust the length of the tail. Thorp points out that the effect, despite its length, does not take up too much space in the mix, so it doesn't necessarily require additional filtering or EQ. He also automates the send, so it only activates during specific song sections. This enhances the song's dynamics and interest. The same vocal effect technique was applied on Beck's "Morning Phase" Album.